RE: [Chrysler300] 300F engine pull question

[michaelvanderveen@xxxxxxxxxxxxxx]

Hi mark im not sure about it with radiator support panel in but i did mine
with radiator support panel out.
Mike in aus.
>-- Original Message --
>To: "Chrysler 300 Club" <Chrysler300@xxxxxxxxxxxxxxx>
>From: "Mark Schueller" <f41324@xxxxxxxxxxxxx>
>Date: Sat, 14 May 2011 16:41:49 -0500
>Subject: [Chrysler300] 300F engine pull question
>Reply-To: "Mark Schueller" <f41324@xxxxxxxxxxxxx>
>
>
>Hi All:
>
>I plan to pull the engine from my 300F.  The manual says to remove the transmission
>before pulling the engine.  Is it possible to pull the engine with the transmission
>on it with the radiator out or is the unit too long?  The car will be on
>the floor and I'll be using a hydraulic engine hoist.  Thanks much.
>
>Mark Schueller
>300C,F  
>
>[Non-text portions of this message have been removed]
>



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/