RE: [Chrysler300] 1957-1958 300C & D Front Arm Rest Supports

["Henry Schleimer" <henry.schleimer@xxxxxxxxxxxxxxx>]

George

 

If you want to drive down the road to Brisbane you can have a look at mine.
I now have two fairly good ones that I was going to use the heat gun on to
try to straighten and then paint.  You can also look at the 57-58 radio
clear plastic face I would like a decent reproduction of.  I suspect there
may be others wanting these as well as they tend to crack.

 

Henry Schleimer

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of georgelaurie@xxxxxxxxxxx
Sent: Monday, 28 February 2011 8:08 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] 1957-1958 300C & D Front Arm Rest Supports

 

  

Hey guys, I certinly don't want to step on any toes here, but I really can't
see that I would have any big problem reproducing the 57-59 armrests. Of
course I would need some decent originals to work with and I would plan on
making them stronger than original.
If anyone has even some crappy ones to send me so I can look at them I can
give you a definite on if I can do them and what the cost would be per unit.

My guess-to-mation going from pictures would be around the $100.00 each and
I pay for set-up, BUT I really would have to personaly examine them to give
a definite, George. ( Australia )
PS- Now making Highest Quality 300B Hubcap emblems, pictures soon
----- Original Message ----- 
From: Keith Boonstra 
To: Larry Jabin 
Cc: Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com>  
Sent: Monday, February 28, 2011 2:19 PM
Subject: Re: [Chrysler300] 1957-1958 300C & D Front Arm Rest Supports

Larry,you just pulled my chain. I've been working on this along with 
Mike Burke and Jim Bartuska ever since about last August. The Eastern 
Club is planning to make these available as a project. I've never heard 
of anyone who has a really nice pair either on or off a '57-'59 car. A 
combination of bad plastic materials used and stress on the two screws 
holding them to the door did every last one of them in. The problem in 
reproducing them has been that a lot of tricky functions and shapes all 
have to happen at once on these things, and we have been trying to 
accomplish this without springing for something like 20-25K for an 
injection mold.

What we are working on involves a multi-part vacuum mold process that 
will cost about half as much. We have a company that is interested and 
has put a fair amount of work into it already. I made up a perfect 
model in mahogany for them way back last fall, and we've picking away at 
the project ever since. The delay has been getting them to fast-track 
it because they've been pretty busy. Frankly, so far it's been hard to 
get them to focus on any kind of a schedule. My contact there will be 
back from vacation (again) tomorrow morning, and I have it on my to-do 
list to become a bit of a badger with him on the subject.

I need a pair myself as badly as anyone; and I know I've said this 
before, but I hope within the next few weeks to have some true progress 
to report.

Keith Boonstra

-

On 2/26/2011 9:43 PM, Larry Jabin wrote:
>
>
> 1957-1958 300C & D Front Arm Rest Supports
>
> I know this has been discussed in the past & someone was working on these
> Anyone heard anything lately
>
> Also if anyone has a decent pair they want to sell please let me know. 
> I know they won't be cheap
>
> Thanks
>
> Larry Jabin
> San Francisco..
>
> 300D
>
> Larry@xxxxxxxxxx <mailto:Larry%40pwbsfo.com>  <mailto:Larry%40pwbsfo.com>
>
> [Non-text portions of this message have been removed]
>
> 

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/