Re: [Chrysler300] "H" Throttle Linkage

[Mark Souders <MRS954@xxxxxxx>]

Matt,
Where that clip is, there's a slot that a shaft sets in. The clip is supposed to keep the shaft in the slot. I eliminated the clip problem by welding a washer onto the bracket at the slot, then slid the shaft through the washer and re-assembled. After that I made the adjustment detailed in the FSM. It's been working great ever since.

Mark Souders
300H
Mohrsville, PA
 






-----Original Message-----
From: Matt Allyn <allynentertainment@xxxxxxxxx>
To: Chrysler300@xxxxxxxxxxxxxxx
Sent: Sun, Dec 12, 2010 11:48 am
Subject: [Chrysler300] "H" Throttle Linkage


So....
y transmission guy adjusted the carburetor to transmission linkage a few 
undred miles ago and the car has been shifting good and hard (but not too 
ard).
Then the plastic clip that lives on top where the transmission bolts to the 
otor started to pop out of its metal housing.
 replaced the thin, old clip with a good original. (Thanks Ken!)
Now THAT clip is popping out too!
This is the clip that holds a horizontal rod... and the linkage offshoots from 
hat rod towards the carburetors AND down the firewall.)
I assume that I need to break out the shop manual and do the full linkage 
djustment procedure from start to finish?
ny other thoughts?
Thanks!

att Allyn

      
[Non-text portions of this message have been removed]

------------------------------------
To send a message to this group, send an email to:
hrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
o to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave 
roup" button
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! 
roups Links
   Individual Email | Traditional
   http://docs.yahoo.com/info/terms/



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/