[Chrysler300] Re: Two questions on '57 C

["John Fowlie" <bigmauto@xxxxxxxxxxxxx>]

Keith, if the head pipe has a twisted look to it, most likely it was done by
a muffler shop that made the pipe a few degrees off, and then heated and
twisted the flange in order to get it to fit the manifold flange. 

I have seen it done before.

 

An old beer opener 'Church Key' is also a handy tool for removing drip rail
moldings, just be sure to put tape across the flat part that comes in
contact with the trim, so as not to damage the surface, and be sure to use
the end for opening bottles.

 

---John



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/