[Chrysler300] Re: 300D Camshaft

["Jim & Ester Wildharber" <jwildharber@xxxxxxxxxx>]

First, you can remove the cam by taking the radiator out and the front of the motor off.

My experience was to first have recommended to me an Isky D888 cam as the way to go.  Not so, the cam had a nice lope, but no vacuum for brakes.  I contacted Nielson Vintage Cams, 644 West 100 North, Farmington, Utah 84025.  Phone number is 801-451-7745 and had a cam built.  It is a replica of the original cam and works great in my 300D.  Make sure you also buy the correct solid lifters to go with the cam.

Hope this helps,   Jim Wildharber

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/