Re: [Chrysler300] silicone fluid

[<smopar@xxxxxxxxxxxxxx>]

I had the same problem on my 300C and 300F, and converted to the later under dash brake pedal switch.  That took care of it.
Steve Albu

---- louis amsler <la1948@xxxxxxxxxxxxx> wrote: 
> Same here- 300F.  I had to replace at least 1 leaky cyl every spring 
> until I converted to silicone fluid.  Never happened again.  Only 
> problem was it got through the brake light pressure switch after a 
> while.  I was going to convert to a 300G setup but sold the car.  The 
> neat part is it doesn't hurt the paint!  Somewhere here I remember there 
> was mentioned a Harley switch that is silicone proof.  Just my 2 cents.



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/