[Chrysler300] Re:drilling through carpet

["Bob Merritt" <bob@xxxxxxxxxxxxx>]

That is a good suggestion from Dave.

Here is another:

don't drill. At the location for the through bolt, cut the carpet with an Xacto knife in the form of an 

"+" . 

The cut doesn't have to be very big, all you want are flaps that can move enough to allow the bolt through.

The seat belt anchor washer will cover the cuts as well.

Hi ho
Rrrrrockin' Rrrrobert





  ----- Original Message ----- 
  From: Dave Schwandt 
  To: list server 
  Sent: Sunday, October 10, 2010 10:11 PM
  Subject: [Chrysler300] drilling through carpet


    
  Try this.....

  Melt a hole through the carpet fabric with your solder gun 1st.
  This will "sear" the strands melting them together on the ends so they don't ravel up in your drill bit.
  Just be sure to melt a big enough hole is all!

  Dave, Schwandt

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/