Re: [Chrysler300] Rear spring rebuild - 300H

["Dave Schwandt" <finsruskw@xxxxxxxxxxxxxxx>]

If they are like most cars I have taken apart the springs will be rusted, 
cracked and/or broken where they all clamp together and be pretty much junk.

I'd get the new springs through the club if it were me.
JMHO

Good Luck

Dave Schwandt

----- Original Message ----- 
From: "Charlie Valentine" <cross.ram@xxxxxxxxxxx>
To: <2HsandaHeritage@xxxxxxxxxxx>; "Carlton Schroeder" 
<schroe99@xxxxxxxxxxxx>
Cc: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Saturday, September 25, 2010 4:01 AM
Subject: Re: [Chrysler300] Rear spring rebuild - 300H


> Won't the spring rebuilder in Wausau, WI sell you the needed front 
> bushings, leaf interliners, and the rubber pads for the clips?
> Also, are you sure that  that's all your springs need ......... taking 
> them apart and reassembling them with new front bushings, leaf 
> interliners, and the rubber pads for the clips ?  The spring leaves may 
> need to be re-arched to give them the right geometry to make your G sit 
> right.
> WHAT is Rearching?
> Rearching is a process of re-curving each leaf spring to original or 
> custom specifications. Once the springs are individually rearched they are 
> then heat set. Heat setting is done by heating the spring to a specific 
> tempature for a specific time.
>
> Just some thoughts....happy 300'ing
>
> Lion Charlie Valentine
> 300G, 1962 300 Sport Convertible
>
>  ----- Original Message ----- 
>  From: 2HsandaHeritage@xxxxxxxxxxx
>  To: Carlton Schroeder
>  Cc: Chrysler300@xxxxxxxxxxxxxxx
>  Sent: Thursday, September 02, 2010 11:10 PM
>  Subject: Re: [Chrysler300] Rear spring rebuild - 300H
>
>
>
>
>
>  Hi Carleton,
>
>  You might find some of what you are looking for at" Rare Parts " in 
> Stockton, CA.
>
>  Doug Warrener
>
>  Fair Oaks, CA
>  300H
>
>  ----- Original Message ----- 
>  From: "Carlton Schroeder" <schroe99@xxxxxxxxxxxx>
>  To: Chrysler300@xxxxxxxxxxxxxxx
>  Sent: Thursday, September 2, 2010 9:07:06 AM
>  Subject: [Chrysler300] Rear spring rebuild - 300H
>
>
>
>  Hello,
>
>  Does anyone know of a source for the front bushings, leaf interliners, 
> and the rubber pads for th
>  e clips? NAPA had the shackle bushings. One Mopar source I found on-line 
> only had 66 and later cars.
>  There is a spring rebuilder in Wausau, WI who says they would check and 
> rebuild the springs but I'm inclined to rebuild them myself. My manual 
> shows a special tool to push-in the front bushing but I think I could get 
> by with a makeshift tool.
>
>  Also, if anyone would like to see a 'poor mans rotisserie' send me an 
> email and I'll email you a picture. It has really been nice for working on 
> the bottom of my H.
>
>  Carlton Schroeder
>  Eagle River, WI
>
>  [Non-text portions of this message have been removed]
>
>  [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
>
> To unsubscribe from this group, send an email to:
>    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups 
> Links
>
>
>
> 



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/