Re: [Chrysler300] 64 camshaft

["Gary Barker" <gbarker@xxxxxxxxxxxx>]

Go to pawengineparts.com       They have all brands of cams.  I don't know how big you want to go on your cam, But if you want to stay with a Factory Original  Muscle car grind.  I would go with MPP-4452783  It's the old 440  375 HP cam.  Not to wild but will wake up any stock big block.    268-284-46    lift is .450/.458   single bolt.
From: Dave Dumais 
Sent: Friday, May 28, 2010 7:50 AM
To: Chrysler300@xxxxxxxxxxxxxxx 
Subject: [Chrysler300] 64 camshaft


  
Hello again!
I am in the process of re-installing the 7 leaf springs that should have been on, to complement the front sway bar. Tough job by myself, lying on the creeper. anyway,

Remember the camshaft chat at the Spring meet? I should have written down the specs.
It was the old TRW 327 universal Mopar Cam for the 383, 413, and 440 blocks. According to the famous engine re-builder, this is as close to original and, it will wake up the engine on low end and to mid-range.

I could not find a listing for Perfect Circle, but found a site called Rock Auto. I want tobe certain that I get this right. Now, can some one point me in the direction of where to find the source?

thanks!

Enjoy the Holiday..........300K-ly, Dave in Virginia

[Non-text portions of this message have been removed]






---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 100528-1, 05/28/2010
Tested on: 5/28/2010 6:11:58 PM
avast! - copyright (c) 1988-2010 ALWIL Software.
http://www.avast.com




[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/