Re: [Chrysler300] Steering Column Seal & Power Steering Pump

[Keith Boonstra <kboonstra@xxxxxxxxxxxx>]

Albert Vannice wrote:
>  
>
> Tom,
> I checked my records, and I got a power steering coupler for my F in a 
> kit from JC Auto in 1998. It included the insulator (#1822668), 
> plastic wear liners, and a ground strap (and cost $40). Regarding the 
> P/S unit, you might contact Power Brake X-change in Pittsburgh (412 
> 441-5729). They worked on the P/S unit in my C300 in 2001, and I was 
> pleased with their work. I hope this information helps.
> Al Vannice
>
> ________________________________
> From: Chrysler300@xxxxxxxxxxxxxxx 
> <mailto:Chrysler300%40yahoogroups.com> [Chrysler300@xxxxxxxxxxxxxxx 
> <mailto:Chrysler300%40yahoogroups.com>] On Behalf Of Tom Cox 
> [tdcox@xxxxxxxxxxxxx <mailto:tdcox%40bellsouth.net>]
> Sent: Wednesday, May 19, 2010 5:02 PM
> To: 'Chrysler 300 group'
> Subject: [Chrysler300] Steering Column Seal & Power Steering Pump
>
> I am in need of the rubber seal that fits over the steering column 
> fork and
> slides into the sleeve at the steering box. I believe it cushions the
> steering column and reduces play in the steering. I looked in G Goers
> catalog but couldn't figure out if one of those buggers was the right one,
> or not.
>
> Also, does anyone know of a good place to have a power steering pump
> rebuilt? I tried the list of sources in the Tech Listing but many were out
> of business.
>
> Thank you.
>
> Tom Cox
>
> _____
>
> From: Chrysler300@xxxxxxxxxxxxxxx 
> <mailto:Chrysler300%40yahoogroups.com><mailto:Chrysler300%40yahoogroups.com> 
> [mailto:Chrysler300@xxxxxxxxxxxxxxx 
> <mailto:Chrysler300%40yahoogroups.com><mailto:Chrysler300%40yahoogroups.com>] 
> On
> Behalf Of Ron Waters
> Sent: 2010-05-12 8:37 AM
> To: Chrysler 300 group; MATTHEW OSTROWSKI
> Subject: Re: [Chrysler300] Vibration Damper 300G
>
> Hi Matt -
>
> I had one rebuilt by Damper Dudes in Anderson, CA. Very happy with 
> results.
>
> Website: http://www.damperdu <http://www.damperdudes.net/> des.net/
>
> Phone: 1-800-413-2673
>
> Address:
>
> Damper Dudes
>
> 6180 Parallel Rd.
>
> Anderson, CA 96007
>
> Turn around was about two weeks, IIRC.
>
> Ron
>
> ----- Original Message -----
> From: "MATTHEW OSTROWSKI" <m.ostrowski@ <mailto:m.ostrowski%40snet.net>
> snet.net>
> To: "Chrysler 300 group" <chrysler300@
> <mailto:chrysler300%40yahoogroups.com> yahoogroups.com>
> Sent: Wednesday, May 12, 2010 7:05 AM
> Subject: [Chrysler300] Vibration Damper 300G
>
> > Good Morning Fellow Members,
> >
> > Last week I finally pulled the wraps off my "G" and drove it over to my
> > home getting it ready for the season. When starting the car up I'm 
> hearing
>
> > a "clunking sound". Upon inspection (with my mechanic buddy) we 
> determined
>
> > that the vibration damper is loose/has play in it. What do I need to 
> do to
>
> > repair this? Where can I find a replacement part? Do any of you have one
> > and would be willing to sell it?
> > Let me know, as always I appreciate your assistance on this matter.
> >
> > Warm Regards,
> > Matt Ostrowski
> > Norwich, Connecticut
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > To send a message to this group, send an email to:
> > Chrysler300@ <mailto:Chrysler300%40yahoogroups.com> yahoogroups.com
> >
> >
> > To unsubscribe from this group, send an email to:
> > Chrysler300- <mailto:Chrysler300-unsubscribe%40yahoogroups.com>
> unsubscribe@xxxxxxxxxxxxxxx 
> <mailto:unsubscribe%40yahoogroups.com><mailto:unsubscribe%40yahoogroups.com>
> >
> >
> > For list server instructions, go to
> > http://www.chrysler <http://www.chrysler300club.com/yahoolist/inst.htm>
> 300club.com/yahoolist/inst.htm
> >
> > For archives go to http://www.forwardl
> <http://www.forwardlook.net/300-archive/Yahoo> ook.net/300-archive/Yahoo!
> Groups
> > Links
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> 


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/