[Chrysler300] Re: F or G trunkpan needed,parting a 63 coupe

["richard_e_osborne" <richard@xxxxxxxxxxxx>]

I used a trunk floor from a '63 or '64 Chrysler for my G hardtop. I only remember needing to relocate the jack/spare hold down brackets.

Best regards,

Richard Osborne


--- In Chrysler300@xxxxxxxxxxxxxxx, "Bob Jasinski" <rpjasin@...> wrote:
>
> Regarding trunk floors, I copied this thread from 2006 that will provide
> insight as to what fits.  It's from Don Verity and John Hertog.  Also, I
> know someone was/is reproducing the floors, I just have to find it.  They
> were about $175 delivered.
>  
> Bob J
>  
> Hi All,
> 
> The trunk floors from 60-64 are exactly the same as removed at the spot
> welds. The location of the spare tire hold down is the only difference. The
> filler neck area is actually part of the rear body panel.
> 
> 300ly,
> 
> Don
> 
> ----- Original Message -----
> 
> From: John J. Hertog <crossram@...>
> 
> To: Jonnie <Jslayton@...>; <Chrysler300@xxxxxxxxxxxxxxx>
> 
> Sent: Saturday, January 07, 2006 6:37 AM
> 
> Subject: Re: [Chrysler300] trunk floors
> 
>  
> 
> > Hi Johnnie,
> 
> >
> 
> > My turn - if you find two of them, let me know, I also need one ! The 
> 
> > answer to your question is that 60 thru 64 Chrysler are the same as 
> 
> > far as the flat part of the floor. Find a '64 (a lot easier to find) 
> 
> > and you are all set. There is only one very minor difference and it's 
> 
> > by the gas
> 
> filler
> 
> > area if memory serves me right.
> 
> >
> 
> > John
> 
> > ----- Original Message -----
> 
> > From: "Jonnie" <Jslayton@...>
> 
> > To: <Chrysler300@xxxxxxxxxxxxxxx>
> 
> > Sent: Friday, January 06, 2006 10:43 PM
> 
> > Subject: [Chrysler300] trunk floors
> 
> >
> 
> >
> 
> > > Can someone tell me if the 60-61 trunk floors are the same ? Does 
> 
> > > anyone have a used 61------decent shape------they would like to sell 
> 
> > > ?------Johnnie Slayton
> 
> 
>   _____  
> 
> From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
> Behalf Of Jerry Lindsay
> Sent: Monday, March 08, 2010 4:12 AM
> To: chrysler300@xxxxxxxxxxxxxxx; charles marshall
> Subject: Re: [Chrysler300] F or G trunkpan needed,parting a 63 coupe
> 
> 
>   
> 
> I know there is a source out there, New Jersey, Georgia, somewhere. I know 
> Source One makes floor pans that fit, and I believe the trunk guy may have 
> even advertized in our club leter??
> 
> Jerry Lindsay
> ----- Original Message ----- 
> From: "charles marshall" <dualghia@hotmail. <mailto:dualghia%40hotmail.com>
> com>
> To: <chrysler300@ <mailto:chrysler300%40yahoogroups.com> yahoogroups.com>
> Sent: Sunday, March 07, 2010 9:51 AM
> Subject: [Chrysler300] F or G trunkpan needed,parting a 63 coupe
> 
> anyone have a solid trunkpan from a 1960 or 61? is a 62 the same?
> 
> also could use the panel that holds the weatherstrip between the bumper and 
> trunklid
> 
> helping a friend dispose of 63 non-letter coupe parts from a rust-free calif
> 
> car if anyone needs any sheetmetal,chrome,int parts,383 core,etc
> 
> __________________________________________________________
> Hotmail: Trusted email with Microsoft's powerful SPAM protection.
> http://clk.atdmt. <http://clk.atdmt.com/GBL/go/201469226/direct/01/>
> com/GBL/go/201469226/direct/01/
> 
> [Non-text portions of this message have been removed]
> 
> ------------------------------------
> 
> To send a message to this group, send an email to:
> Chrysler300@ <mailto:Chrysler300%40yahoogroups.com> yahoogroups.com
> 
> For list server instructions, go to 
> http://www.chrysler <http://www.chrysler300club.com/yahoolist/inst.htm>
> 300club.com/yahoolist/inst.htm
> 
> For archives go to http://www.forwardl
> <http://www.forwardlook.net/300-archive/Yahoo> ook.net/300-archive/Yahoo!
> Groups 
> Links
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>




------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/