
Re: [Chrysler300] Re: Re-painting the white "Chrsyler" lettering on 300G
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Chrysler300] Re: Re-painting the white "Chrsyler" lettering on 300G grill
- From: Anthony Rinaldi <awrdoc@xxxxxxxxx>
- Date: Thu, 25 Feb 2010 06:51:42 -0800 (PST)
If you do that steep hill thing, bring big chocks made for trucks.
On Thu Feb 25th, 2010 8:54 AM EST Pat Grant wrote:
>park the car on a very steep hill. lot easier than taking the grill out.
>
>
>
>
>________________________________
>From: Bob Jasinski <rpjasin@xxxxxxxxxxx>
>To: richard_e_osborne <richard@xxxxxxxxxxxx>; Chrysler300@xxxxxxxxxxxxxxx
>Sent: Wed, February 24, 2010 10:21:10 PM
>Subject: RE: [Chrysler300] Re: Re-painting the white "Chrsyler" lettering on 300G grill
>
>
>I repainted my 300G grill letters back in 1985 and agree with Richard, it is
>best to do it out of the car. Gravity is really your friend here. After a
>though cleaning of each letter, I brushed in thinned (but not too thin) "One
>Shot" paint. It comes in small cans. Laying the grille flat really allows
>it to cure nice and level. I found I needed 5 or 6 coats to get the
>coverage I wanted but really filled in nicely. It's also been very durable,
>I've washed bugs right off of it (with a sponge) and the paint still looks
>great. As I recall the base metal was rough and needed multiple coats to
>look good. I think I used a chemical stripper for removing the old paint.
>
>Having said all that, a person with a steady hand, good eyes, and the right
>paint could probably do a satisfactory job with the grill in the car if they
>took their time and made the effort.
>
>Bob J
>
>_____
>
>From: Chrysler300@ yahoogroups. com [mailto:Chrysler300@ yahoogroups. com] On
>Behalf Of richard_e_osborne
>Sent: Wednesday, February 24, 2010 6:36 PM
>To: Chrysler300@ yahoogroups. com
>Subject: [Chrysler300] Re: Re-painting the white "Chrsyler" lettering on
>300G grill
>
>Joe,
>
>I have done this a few times and can say that it is much easier and the
>results are much better if painted when the grill assembly is out of the
>car, laying flat. I used the touch up paint from my white G. I put a touch
>of thiner into the paint to make it flow better. Then, I wait for the paint
>to be pretty tacky after filling the letters. When it is in this state, I
>use a thinner soaked rag wrapped tightly around my figure to wipe off the
>excess that got outside of the letters.
>
>The medallion can be held in place with just simple silicone sealer such as
>used with gaskets.
>
>Have fun.
>
>Richard Osborne
>
>--- In Chrysler300@ <mailto:Chrysler300 %40yahoogroups. com> yahoogroups. com,
>"joeagins@.. ." <joeagins@.. .> wrote:
>>
>> I feel silly asking this but I need to repaint the indented, white
>"Chrysler" lettering on my 300G grill and I am trying to figure out the best
>way to do this and what the best paint would be, etc.
>>
>> I know the letters were white and should probablly be sprayed but am
>trying to come up with the most efficient and effective way of doing this. I
>figure someone else has done it and maybe can offer some simple advise.
>>
>> My grill is also without the 300G grill emblem which I will be ordering
>soon. Once I get this, what is the best way to secure it to the grill? What
>type of adhesive should I use?
>>
>> Any advise anyone can provide would be appreicated.
>>
>> Thanks,
>>
>> Joe in AZ
>>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>[Non-text portions of this message have been removed]
>
------------------------------------
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
Chrysler300-digest@xxxxxxxxxxxxxxx
Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap