[Chrysler300] Convertible Top Seal

["Mark Lindahl" <mplindahl@xxxxxxxxxxxxx>]

Hi All,

I have replaced the rubber gasket on the convertible top header (Goers) on my '63 300 Conv, but I have not played with all the adjustments shown in the service manual.  I think some of the screws/nuts may be stuck for those adjustments and I also don't know which adjustments are the most critical?  In general, do these tops not leak at all if they are adjusted properly?  Any comments would be appreciated.

Regards,
Mark Lindahl
'63 300 Conv.

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/