Re: [Chrysler300] reciever drier/oli

["rob kern" <robkern@xxxxxxxxxxxxx>]

Dave,
    I have been running R-12 in my factory C A/C system.  I recently switched to Maxi-Fridge 12a.  This is up to 30% more efficient and much cooler than R-12 with no environmental hazards.  My A/C is cold (front and rear).  12 cans ran about $78 vs $45/can for R-12 with the requirement of having an A/C license to purchase. No conversion equipment required.  I obtained it online and it was delivered to my front door in 2 days!  300'ly,  ROB KERN
  ----- Original Message ----- 
  From: Dave Schwandt 
  To: list server 
  Sent: Wednesday, September 09, 2009 4:08 PM
  Subject: [Chrysler300] reciever drier/oli


    had a fellow tell me I should put a little a/c system oil in my new reciever drier before installing it.

  I'm hanging a new rebuilt A/C compressor on the F and EPR valve also. Gonna use R-12

  System has been down for 5 years or so and still had a charge in it. The old compressor had locked up and burnt the clutch and bearing up.

  Any comments??

  Dave Schwandt

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/