[Chrysler300] 57 300C Trans kickdown linkage

["Carlton Schroeder" <schroe99@xxxxxxxxxxxx>]

Hello,

I've been doing without this kick down linkage for too long and hope someone has one they would part with or can point me to a source.

I need the rod (and attachment) from the firewall bracket to the transmission shaft.  My trans shaft is about 3/8  - 1/2" dia. with a flat face on the upper end.  I think a small lever clamps on the flat face of the shaft and there is also an adjustment mechanism where the shaft attaches to the lever.

I have a 58 Chrysler parts book that I think identifies these as parts 1734979 and 1735025.   I don't know if these were the same nos. for the 57's and I am not sure how many different cars/models used these same parts.  

If I'm misinterpreting anything please let me know

Thanks for your help,

Carlton Schroeder
Eagle River, WI  

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/