[Chrysler300] rebuild of the instrument Power pack

[Ulf Larsson <ulf.larsson@xxxxxxxxxxxx>]

Hi group,



Already published through the Imperial group that a failing Power pack using transistor Bendix PS 26 can be rebuilt using new transistor MJ 2955 if also changing R2 into a 120 ohm (instead of original 50 ohm).  Wise would also be to replace the kapacitor with a new PAPER type with original spec 0.068 mfd or close but pref rated higher than 330V/AC



but,



What to use for to rebuild the Power Pack type using the Bendix PS 19 transistor?





Best regards

Ulf Larsson, Sweden









[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/