[Chrysler300] 1960 Generator Pully

[Thomas Cox <tdcox@xxxxxxxxxxxxx>]

I have rebuilt the generator for the F, but realize it has a single position pulley and I need a two-slot pulley. The pulley on the rebuilt generator has a nut or screw that holds the pulley on as opposed to a pulley that is pressed on the shaft. Does anyone have a pulley that is NOT pressed onto the shaft that will fit a 1960 generator? Thank you for looking.

Tom Cox



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/