[Chrysler300] 300F A/C Compressor Bracket

[Thomas Cox <tdcox@xxxxxxxxxxxxx>]

Hi to all,

The dash is painted and ready to install but the
ignition switch I just received from Gary Goers doesn't seem to match
up with the dash. The dash has "slots" for the ignition switch
receptacle at 9 o'clock and 3 o'clock and the switch from Gary has
"protrusions" at 11 o'clock and 1 o'clock, so it doesn't fit. I have
dashes from F's and G's but wouldn't imagine the F dash is
significantly different than the G dash in this regard. Is this my
problem? I am certain I requested a switch for an F, so I believe that
I would have received the correct switch. Any thoughts or suggestions?

Thank you.

Tom Cox





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/