Re: [Chrysler300] Alignment

[mwl1967@xxxxxxx]

In a message dated 4/19/2009 3:50:32 PM US Mountain Standard Time,  
moparpjf@xxxxxxx writes:

Hi  Group:

Am I correct in assuming that the alignment specs are the same  for the 
G as for the F? Also, I remember that one of the specs should be  as far 
as possible without interfering with the other, but I don't know  whether 
it 
is maximum camber or caster. Will somebody be kind enough to  remind me???

Thanks,

Pete Fitch



Pete,
            Caster  as high positive as possible, Camber slightly negative 
or zero but never  positive.   My 300K convert I'm able to get 2-1/2 degress 
positive  caster both sides but my hardtop I get barely 1 degree 
positive... can't figure  out why.
 
Mike Laiserin
**************Access 350+ FREE radio stations anytime from anywhere on the 
web. Get the Radio Toolbar! 
(http://toolbar.aol.com/aolradio/download.html?ncid=emlcntusdown00000003)


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/