[Chrysler300] electric window motor removal ?

["lil_jake5" <vjhemi@xxxxxxxxxxx>]

Hi all,
Was on a run last night and my electric motor in the window winder has burnt out and i have taken the door lining off and all handles etc, but my question is - is there an easy way of removing the motor and is it just 2 bolts and it comes out.
Its for a 1965 300L drivers side door window with the 4 window controler.
The controller works the other 3 windows but not the drivers side(i think it got stuck in the down motion for a few hours and just burnt the motor or wiring out.
any help apreciated by those who have done this exact job previouosly.
I just want to be sure before i tackle it and stuff something up.
cheers
Jeff
Australia



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/