[Chrysler300] bucket seat shells

[david dumais <dvd_dumais@xxxxxxxxx>]

Hi Group,  I am cleaning the metal shells of the 64 300 bucket seats.   I noticed an off color paint, so I prepped the shell with a  scotch pad and proceeded to apply a brite white acrylic enamel.
 
I noticed that the enamel was creating "fish eyes" , which can't be filled in.  So I removed the paint with a rubbing of Acetone.  And repeated the process.  Again, fish eyes were looking back at me.     I hopped over to the nearest auto store and purchased acrylic lacquer.    After a small test area, fish was back.
 
I then proceeded to use a chemical stripper, which removed the rogue paint, and left the shell with the "pearlescant white " .      Now I noticed a tear in the lower section, and it turns out to be a vinyl/rubber  factory coating with the a wrinkle finish.
 
Has any body found the same on their seats?  Can this vinyl be re-applied? 
                 
                                                       thanks,Dave
 


 


      

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/