[Chrysler300] 300C Power Seat rebuild

["Henry Schleimer" <henry.schleimer@xxxxxxxxxxxxxxx>]

I am trying to rebuild my power seat "slave" gearboxes.  The diecast mounts
were broken out on the originals and the replacement ones I got had started
to bend and crack.  The housing is obviously a weak design for the high
forces involved and I suspect all used ones are broken or on their way out.
I think I have figured out a possible way of reinforcing the gearbox with
some extra bolts tapped into the frame underneath.  However, before I launch
into that, I thought I'd ask if anyone knew a source for good gearboxes or
had developed a fix that held the gearboxes better.

 

Also, if anyone has a good set of plastic? covers that go around the sides
of the seat cushion, let me know.  (Gary Goers doesn't have them)  I have
the 58? chrome ones if all else fails.

 

Thanks

 

Henry Schleimer

Brisbane Australia



[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/