[Chrysler300] Convert Top Header-To-windshield Frame Indexing Pins 62H

[Kenneth Wilson <jblken@xxxxxxxxxxx>]

Help!   I'm in the midst, today, of assembling the SS trim around the 
windshield and about to bolt the two chrome, bullet end, pins into the 
header bow.   The parts list show to rubber seals near where the pins 
bolt to the header bow (the exploded parts list view of the top does not 
show the pins!).  It's been 30 years since I dismantled the car and do 
not know what these look like or where exactly they go.  Do these fit 
onto the pin at it's base?  Also the the holes in the SS top piece (and 
under it through the windshield top frame) are larger diameter then the 
pins! Is that rubber seal suppose to be installed under the the SS 
header strip to make a tighter fit of the pins or do the suppose to fit 
sloppy in the oversize hole  (I wonder with a tight fit of the index 
pins, into their holes, the top header will not  index the latches and 
or the header bow will jiggle/squeek with the twisting vibration  of the 
car  when on the road.  Any help (or pictures) is appreciated

Ken Wilson, San Jose
1962 300H

------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/