[Chrysler300] Heater Core

["Jim Maiani" <jmaiani@xxxxxxxxxxx>]

Hello to everyone out in 300land.....Hope all is well.

I now have a new problem.  The heater core in my H has started leaking.  Before I find a radiator shop to fix it, I was wondering if anybody knew of any new/reproduced 62 heater cores available?  Thank you in advance for your replies.

Jim Maiani
Houghton Lake MI
62 300 H
69 Dart GTS convertible


  ----- Original Message ----- 
  From: Tony Rinaldi 
  To: George Riehl ; dkshapiro@xxxxxxxxxxxxx 
  Cc: Chrysler 300 Club 
  Sent: Tuesday, July 22, 2008 9:51 AM
  Subject: [Chrysler300] Coils


  Hi David,

  Attached below is the documentation from MSD that their oil filled coils are
  only to be mounted in the upright position. Their epoxy filled coils need to
  be used in the horizontal position.

  Their oil filled coil failed on my car, but because they did not warn users
  about the vertical position only, they replaced the oil filled coil with an
  epoxy filled coil.

  These coils, however, are to be used on our cars in conjunction with MSD
  ignitions.

  George has given you some good advice about buying an oil filled coil known
  to be used in the horizontal position.

  Tony Rinaldi
  300-F Conv¹t

  From: George Riehl <longrams@xxxxxxxxxxxxx>
  Date: Sun, 20 Jul 2008 23:34:49 -0400
  To: Tony Rinaldi <awrdoc@xxxxxxxxx>
  Subject: Re: [Chrysler300] coils

  David; Go to your Carquest Auto Parts and get a UC 12 coil (12 V.). DO NOT
  buy an epoxy coil for your G. You are being given wrong information.
  Statement about coils being vertical only apply to late '90s and 2000s autos
  with totaly different systems. Even then, most are epoxy or air cooled.
  George Riehl 



  > 
  > ----- Original Message -----
  > 
  > From: Tony Rinaldi <mailto:awrdoc@xxxxxxxxx>
  > 
  > To: david shapiro <mailto:dkshapiro@xxxxxxxxxxxxx> ; Chrysler 300 Club
  > <mailto:Chrysler300@xxxxxxxxxxxxxxx>
  > 
  > Sent: Tuesday, July 15, 2008 8:48 AM
  > 
  > Subject: Re: [Chrysler300] coils
  > 
  > 
  > 
  > 
  > 
  > 
  > 
  > Hi David
  > 
  > Some newer oil coils, like MSD, cannot be mounted horizontally. The oil
  > doesn¹t cover the internal components and they burn out and will not be
  > replaced under warranty. In this case you need an epoxy coil. Be sure to
  > read the fine print regarding mounting instructions on any coil that you
  > purchase.
  > 
  > Tony
  > 300-F Conv¹t
  > 
  > From: david shapiro <dkshapiro@xxxxxxxxxxxxx>
  > Date: Mon, 14 Jul 2008 22:20:49 -0400
  > To: <Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com> >
  > Subject: [Chrysler300] coils
  > 
  > Hi all,
  > I am sure his has been covered before but i did not
  > make note of the topic til now. Which is better, epoxy
  > coil or oil filled??
  > thanks
  > david shapiro
  > 
  > [Non-text portions of this message have been removed]
  > 
  > [Non-text portions of this message have been removed]
  > 
  > 

  [Non-text portions of this message have been removed]



   

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/