Re: [Chrysler300] drive button

["Don Verity" <d.verity@xxxxxxx>]

Hi Cal and Sara,
The button may have just come off it's perch on the button unit. Remove the bezel by taking the directional knob off (allen screw underneath), and the 4 screws for the bezel. I thing you will find the button lying in there not attached. 
Don Verity
Rhode Island
  ----- Original Message ----- 
  From: casa1@xxxxxxxxxx 
  To: Chrysler300@xxxxxxxxxxxxxxx 
  Sent: Sunday, June 15, 2008 10:48 PM
  Subject: [Chrysler300] drive button


  Finally took time the other day to get the 62 sport out for a run.
  Thanks to the help I recieved from you all the tranny fluid now stays
  in the tranny and not in my oil change pit. Thankyou!
  BUT now the drive button does not work - does not return to the
  out position and there are only first and second gears (and of course
  reverse). Any clues and is this a hard fix?
  Cal and Sara Anderson 62 Sport 



   

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/