[Chrysler300] steering tube

[david dumais <dvd_dumais@xxxxxxxxx>]

I need some help on removing the directional signal bearing housing from the 64.  I am trying to install the secondary rubber seal that I got from Gary. It goes all the way down to the floor boards.  
   
  I have the unit stripped and the upper shaft snap ring is out, just can,t pull the bearing housing up and off the shaft.      Any one done this before?   happy holiday  
                                                        300K-ly    Dave

       

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/