[Chrysler300] valve train oiling on my 392

[dennis57300@xxxxxxx]

ever since i first fired my hemi ive had trouble with getting oil to the  
rockers. sent it back to the motor shop to re-clean the rockers. found crap in  
the oil passages not blown out after the hot tank. the dino went without a 
hitch  but after pulling the valve covers found valves sparcely oiled. going to 
have it  torn down tomorow first to see if the holes in the cam bearing is lined 
up in  the block and possibly sending the cam out to be turned so the heads 
will get  oil on the whole rotation of the cam. has anyone had this problem and 
what was  the remedy?



**************Planning your summer road trip? Check out AOL Travel Guides.    
  (http://travel.aol.com/travel-guide/united-states?ncid=aoltrv00030000000016)


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/