Re: [Chrysler300] ram air filter -- Addendum

["Michael Reed" <mrreed@xxxxxxxxx>]

Forgot to mention in my previous post...

The filters I'm using now are 2-3/16" high. I barely have sufficient threads coming through the top of the air filter to get nuts on now. I now if I used elements that were 2-1/2" high (as Dave suggested) I couldn't get either nut on. As a matter of fact, it is highly questionable whether the nut could be installed on the non-carburetor rod if the filter element was even 2-1/4" high...

Mike Reed in Lake Odessa, Michigan

  ----- Original Message ----- 
  From: Connie Brown 
  To: Chrysler300@xxxxxxxxxxxxxxx 
  Sent: Monday, April 07, 2008 13:59
  Subject: [Chrysler300] ram air filter


  how about AF 267 size 8 7/8 inside 9 5/8 outside
  2 1/2 hi for 60s ford 6 cly.

  david brown newberg oregon

  __________________________________________________________
  You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost. 
  http://tc.deals.yahoo.com/tc/blockbuster/text5.com


   

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/