
RE: [Chrysler300] '56 300B lower Grill molding
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Chrysler300] '56 300B lower Grill molding
- From: "Rich Barber" <c300@xxxxxxx>
- Date: Fri, 28 Mar 2008 12:09:47 -0700
Is this piece the same on 1955 C-300's and 1956 300B?
Several members advised me that the rear window on my C-300 could not be
delaminated since it was single piece of glass. Inspection confirmed the
apparent delamination was stubborn old crud from the rubber molding. I did
a little survey of the glass in the C-300 and found the following. Some of
the little numbers were hard to read. Any corrective editing appreciated.
Front windshield: PPG-SOLEX-DUPLATE AS1 35
Both vent windows: PPG-SOLEX-HERCULITE AS2 9 64
Driver's door: PPG-SOLEX-DUOLITE AS2 9 1 (?)
Passenger's door: LOF-SAFETY E-Z EYE-AS2 CCX LAMINATED
LR quarter: PPG-SOLEX-HERCULITE-AS2 9 16
RR quarter: PPG-SOLEX-HERCULITE-AS2 6 25
Rear window: PPG-SOLEX-HERCULITE-AS2 4 25
It appears the windshield and door glass are laminated while the vent,
quarter and back windows are not. That makes sense from a safety
standpoint. Apparently the passenger's side glass was replaced at some time
in our car. AS1 and AS2 look like some standard--American Standard? I
would like to replace the passenger door glass with a PPG Solex piece if
anyone has an extra.
My wife got T-boned on the driver's side of our 1967 Plymouth and I think
that glass was crumbly, not laminated. She got quite a bit of that
shattered safety glass in the side of her face. Laminated might have been
better.
C-300'ly,
Rich barber
Brentwood, CA
1955 Chrysler C-300
-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of hmpirish
Sent: Friday, March 28, 2008 10:51 AM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] '56 300B lower Grill molding
Hello 300 Fans, On E-Bay there appears to be the most elusive part for a
300B - the chrome trim piece below the grills and above the front bumper ! !
! I have have never seen this piece available in 30 years of
looking for parts for 56 Chryslers. I am certain there are
several 300Bs in the club that lack this piece - Now may be your only
chance. I know nothing about the seller and have no other knowledge, save
what is there. E-Bay id is 130209511760
All the Best 300ing ! Phil
Irish
[Non-text portions of this message have been removed]
------------------------------------
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups
Links
------------------------------------
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:Chrysler300-digest@xxxxxxxxxxxxxxx
mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap