[Chrysler300] 62 Power Brake Booster

[2HsandaHeritage@xxxxxxxxxxx]

Hi Group,

I need some expert help in understanding a problem with the "push rods" in the power brake booster on my 300H.
I obtained this H about two years ago, and the brake pedal has always had about 3/4 inch of free play. 
After completely going through the entire system ( drums, shoes.wheel and master cylinders, bleeding and replacing the fluid and adjustments), I have finally determined that the problem is inside the power brake booster.
The push rod that engages the master cylinder piston was adjusted properly and I determined that the pedal free play was between the two push rods somewhere inside the booster.
I then adjusted out the push rod to the master cylinder piston until most of the free play was eliminated.
As you can guess the brakes locked up, and I have now re-adjusted the push rod to it's original position and again have the free play in the petal.

Thanks in advance for your help and comments,
Doug Warrener
Fair Oaks. CA
300H - 2  

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/