[Chrysler300] Solid Body Metal

["shawndoucette" <s.doucette41@xxxxxxxxxxx>]

Good evening folks, I'm new to the club and would like to take this 
time to say thanks for having me, I am enjoing every minute. I don't 
have a letter car but would like to make one my next project. Anyway I 
have a 63, 300, 4dr, hard top, that I am in the middle of restoring. 
Does anyone know if there is a place that produces or sells sheet metal 
body parts for this car, I would like to replace the trunk pan and both 
lower inside rear fender linings. Eventualy I will need a front right 
fender with trim as well but I would reather cut out and replace these 
parts if possible than just weld pieces over them.

Thanks.

Shawn.



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/