[Chrysler300] Looking for 300-D front sheetmetal part / rocker panel question

[John <spiers@xxxxxxxxxxxxxx>]

Hi Group-
   
  For my 1958 300-D restoration, I'm looking for the formed narrow sheetmetal piece that goes under the grille and above the bumper, and connects the right & left panels that contain the brake cooling ducts.  My panel in question had all the rust removed (by www.autorestorationdepot.com), which revealed a pretty ragged edge that may or may not be hidden when installed on the car.  Does anyone have an extra I can buy/trade for?
   
  My rocker panel question - are there weep/drain holes on the horizontal part of the rocker panels on the 1958 two-door hardtop body?  There certainly are a couple factory rocker panel drain holes on each side of my four-door 1957 Saratoga parts car.
   
  Regards,
  John Spiers
  Lake Worth, Florida

       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/