Re: [Chrysler300] 440 300 problem

[Paul Holmgren <paulholm@xxxxxxxxxxxxx>]

jean-yves chouinard wrote:

> Ryan and all.

snip

> Needless to say the cam in that 426 wedge is trash now. I will have to check crank main bearings and rod bearing before another start up of this engine. I had 2 engines done since the 426 , both were breaked in with John Deere breaking oil and so far no problems or premature wear. I use diesel oil in all my engines.
> Regards.
> Jean-Yves in New Brunswick.(K conv. etc...)

THATS changing also, basicly as I understand it,  NOW!! the 
modifications to Diesel oils is happening now, making it also not so hot 
for us.

-- 
Paul Holmgren
2 57 300-C's in Indy
Hoosier Corps L#6


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/