[Chrysler300] Windshield and Backglass Clips

[2HsandaHeritage@xxxxxxxxxxx]

Hi Group,

I am in the process of replacing a windshield in one H and the backglass in the other one. I am thoroughly confused about moulding and trim clips. The service manual shows moulding clips which I guess hold the rubber moulding in place. Page 31 of Gary Goers catalog show lower windshield and backglass trim clips which I guess are needed for the stainless trim. Does anyone know how many of each that I need and where they can be obtained? Also on the lower trim clips, do I need #361A (larger) or #361B (smaller)? I have the glass, a good windshield rubber and I am hoping to reuse the backglass rubber molding. The work will be done by a local glass shop that specializes on older cars. Any and all advice, suggestions and help will be greatly appreciated.

Doug Warrener
Fair Oaks, CA  

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/