[Chrysler300] Need new wheel studs

[brian hagen <brian.hagen@xxxxxxxxxxx>]

I replaced the wheels on my 63 Chrysler with some vintage Crager rims  
and need to install some longer wheel studs in the drums.  The  
current 1' ones just clear the rims, not enough to be safe.
I also figure it will be a good time to replace the reverse threads  
as well.

I assume the studs I need are 1/2 thread, and i'll look for longer  
than 2" in length. But the question I have is: Whats the correct  
Knurl? The ones Ive found have a .685 knurl.. will this work on the  
tapered drums on a 63?

Anyone know the answer? Or know a good source for new wheel studs?

Thanks in advance
Brian H



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/