Re: [Chrysler300] Wire wheels

[Ray Jones <hurst300@xxxxxxxxxxx>]

Hi all;
That is correct. I once bought a trade-in at the VW dealership where I 
worked, a Ford Station Wagon with 4 near new tires on it for $25.00.
After about an hour of grinding with each wheel, the center holes were 
ground down enough to fit my "L". There is very little difference on 
the I/D size.
Gave me another 40K  for the cost of the wagon, I think I sold the 
wagon later for $50.
Ray


On Jun 6, 2007, at 2:11 PM, johnl wrote:

  Chrysler and Ford passenger cars share the 4.5 x 5 pattern, but you 
can't mount a Ford wheel on a Chrysler as the center hole is to small. 
Personally I've never tried this, but it is what I've been told.


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/