Re: [Chrysler300] '57 Rear Axle Shims

[Ray Jones <hurst300@xxxxxxxxxxx>]

MARK;
Just go to your friendly auto parts store. They have shim stock in many 
different thicknesses. Cut to fit, or beat it ove the edges.
Ray


On May 10, 2007, at 6:47 PM, Mark Schueller wrote:


Greetings All:

My '57 300C needs 0.025" (twenty five thousands) more shims for 
adjusting rear axle end play.  The shims go between the brake support 
plate and the rear axle flange.  I'm guessing any 300 model year '57 to 
'61 shims will work.  Maybe someone can answer that and take the 
"guess" out of it.

Two 0.010" shims and one 0.005" shim would be perfect.  Let me know if 
you have and will part with them.  Thanks!

Mark Schueller
300C, 300F



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/