[Chrysler300] 392 Hemi oil capacity

["Stan Arthur" <stanleyrarthur@xxxxxxxxxxxxx>]

Help!  My 300D has had the original oil canister oil filter replaced.  I now
use a std type filter that I suspect drains right back into the oil pan
after I shut the engine down.  As I was trying to verify this, I was trying
to ensure my dip stick was marked properly.  I have always assumed that the
oil capacity was 5 qts + 1 when the filter was replaced.  Most of the
literature I've checked says this is true.  I have an old set of Chrysler
manuals produced in Canada (for 57-8-9's) that has a chart that shows 4 + 1
and this thru a wrinkle into my into my plan.  Am I right in assuming that 5
+ 1 is correct???  Stan in Orlando..



[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/