Re: [Chrysler300] re installation of rear seat belts in 62 300H conv

[lettercars@xxxxxxx]

Hi Fern and All:
It has been so long---30+ years, I suppose---since installing the rear  belts 
in my H cvt. I can't remember specifics on that car.   However,  when 
restoring the 300F a few years ago, I had the shop put in anchors at both  the front 
and rear.  There were definately dimples in the floor pan sheet  metal that I 
took for drilling locators.  I am sure the "H" would have them  as well.  If 
you have trouble locating them, I can crawl under the F and  give you an 
approximate location.  The dimples are pointing downward, so  the intention was that 
drilling would take place from inside the car.  Hope  this helps a little.
300ly, Gil C.
Tallahassee, FL
 
In a message dated 4/22/2007 2:49:54 PM Eastern Daylight Time,  
crc@xxxxxxxxxxxxxxx writes:

I  want to install a set of rear seat belts in my 1962 300H convertible and 
would  like to correspond with someone who has done so as we are not sure as to 
where  to drill in order to install them please.
Thanks from  Fern








************************************** See what's free at http://www.aol.com.


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/