[Chrysler300] Brake Master Cylinder Question

[pennsy300@xxxxxxx]

I'm changing the master cylinder on my 300F, and for some reason the brake  
push rod is stuck in the piston of the old master cylinder.  It twists in  the 
piston, but even with a significant amount of force, it won't come  out.  
Looking at the service manual, it seems that the push rod should just  easily slip 
into the piston, and not be held with anything.  Has anyone  else out there 
had this  problem?   McTaggart



************************************** See what's free at http://www.aol.com.


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/