RE: [Chrysler300] 300 G Door Panel Trim

["John J. Hertog" <crossram@xxxxxxxxxxxxx>]

Hi Lauren, 

Going on the premise that pictures are worth 1000 words, click on the
following links to view pictures of 300F / 300G door panels (they are the
same)

http://www.chrysler300club.com/reference/300f/interior/interior.html

and

http://www.chrysler300club.com/reference/300f/doors/doors.html
(pictures of Steve Albu's 300F interior and door panels)


Also 

http://www.chrysler300club.com/jhstuff/300frag/cwdata/int12.html

And I'll post a couple more door panel pictures in a few minutes on

http://www.chrysler300club.com/jhstuff/300frag/all.html

John Hertog
Sag Harbor NY




 

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Lauren Lampi
Sent: Tuesday, March 27, 2007 9:06 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 300 G Door Panel Trim

Hi 300 Group,

Spring is here in Northern Minnesota, Back in the garage to finish the G.

Need some help about "trim" on the Door panels.

In my Gary Goers 300 G Upholstery Kit there are three pieces of piping /
cording.

The Black piece of cording is about 6' long and of smaller diameter than the
tan cording

There are 2 pieces of tan cording, each about 3' long and of a bit larger
diameter than the black.

Does one or both of these ( black or tan cording ) go " on the front door
panels."

The door panels have the upholstery installed, but looks a little "bare."

I didn't send the cording to the upholstery shop when they were done (found
them later).

Would the black cording go along the seam between the 3 " tan window top
edge and the 

center tan material ( A length of about a 10" from the back edge of the door
to the black arm rest dip ).

And then continue from the front of the door handle area to the front edge
of the door panel. (about 10")

Any ideas about the tan cording???   

Where does it go?   Just forget about it?

Thanks for any help in this matter.

Lauren R Lampi
Grand Rapids, Minnesota
300 G  Still under construction but getting closer.


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links







To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/