[Chrysler300] seat tilt

["Bob Merritt" <bob@xxxxxxxxxxxxx>]

Here's a question for owners of F, G, and Sport 62s with power seats. It 
regards the tilt function.

On mine, the front elevator will rise for the switch positioned tilt up and 
the front elevator will lower for the switch positioned for tilt down. There 
is no rear elevator action during tilt up or tilt down. In fact, the only 
time the rear elevator works is during straight up or straight down seat 
motion. This works fine, I can adjust the seat wherever I want but I wonder 
if this is how it is supposed to be.

Looking at the service manual, specifically pages 8-71 and 8-90 of 
"Electrical and Instruments" for the 1962 version, it would seem that there 
is a switch position for the front elevator to rise and a switch position 
for the rear elevator to rise. The diagram suggests there is no switch 
position where the front elevator should lower during tilt........yet this 
is what mine does. I wonder if the manual is wrong or if I have the wrong 
switch connections.


I guess my question is: how does your seat work during tilt?
Does your front elevator go up and down or does your rear elevator go up?

As always, any comments about elevators not reaching the top floor are 
invited.

Bob
Auburn, NY
22 degrees and snow. 





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Something is new at Yahoo! Groups.  Check out the enhanced email design.
http://us.click.yahoo.com/kOt0.A/gOaOAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/