[Chrysler300] Sway Bar on 300G

[Kenny Cassady <kennycassady@xxxxxxxxxxxxx>]

Hey gang.  I just had the sway bar pop out of it's end bracket on the
driver's side on my G ...odd.  It appears this might have been made possible
by the fact that the Y-shaped bracket that attaches the sway bar to the
frame is bent.  It appears to be farther forward than the one on the
passenger side, therefore, I'm assuming the bracket was somehow bent
forward.  I doubt that's correct.  Any advice?  My mechanic says he can heat
up the bracket and bend it, but can't guarantee the stability of the part
afterward.  Is this a part I can get somewhere?  Are both sides the same?
Any advice would be appreciated.  Thanks.

Kenny

PS:  I've checked the 300 website's list of Sway Bar vendors.  Quickor
Suspension seems to be out of business, Saner's website is simply referrals
to other sites for auto accessories, and Addco's website doesn't look like
they carry Chrysler parts for older than 1963.



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/