Re: [Chrysler300] brake fest

[Jack Farris <j2farris@xxxxxxxxxxx>]

I don't know about the hissing or skipping, but the slow return brake  
problem could be caused by the compensating port in the MC being  
partially blocked. A long shot might be the wrong size residual  
pressure valve (usually located where the brake line enters the MC).

Jack

---------------------------------------------------------------------


On Jan 27, 2007, at 6:28 PM, david dumais wrote:

> Thanks to all for all the input on "sticking brakes" on the 64  
> Sport.... flushing and replacing the fluid was accomplished, not  
> the cure.    All brake shoes and cylinders are in good shape,  
> recently replaced.   All rubber hoses are now new, pedal slams  
> brakes and returns slowly to up position.
>
>   There is a hissing noise when pedal is depressed, and the motor  
> seems to skip when in gear.    Could this be the vacuum booster?    
> There is no evidence of an external leak.
>
>                    floundering in Va,    Dave D.



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/