
Re: [Chrysler300] 61 300 g
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Chrysler300] 61 300 g
- From: "David Schwandt" <finsruskw@xxxxxxxxxxxxxxx>
- Date: Wed, 18 Oct 2006 19:35:46 -0500
Should not be a big deal to re-pro these. It's just a piece of flat sheet
bent with a small die. I imagine the weight may be critical is all.
Re-pro commitee are you listening??
Dave Schwandt
----- Original Message -----
From: "John J. Hertog" <crossram@xxxxxxxxxxxxx>
To: "'Tomas Turovaara'" <tomas.turovaara@xxxxxxxxx>;
<Chrysler300@xxxxxxxxxxxxxxx>
Sent: Wednesday, October 18, 2006 7:06 PM
Subject: RE: [Chrysler300] 61 300 g
> Hi Tomas,
>
> Both the 300F and the 300G use the same 2903S Carter AFB carburetors. The
> only difference would be in the date code (which nobody cares about in
> Club
> concours - yet! ).
>
> Jeff Carter, indeed, may be able to help you with some of the exhaust heat
> riser parts you mention. Finding the counterweight for the passenger side
> is nearly impossible - it is a mirror image of the left side unit and
> pretty
> much only used on ram cars - therefore it is very rare . Hopefully
> someday
> someone will reproduce that part. www.jcauto.com
>
> Another source of heat riser parts is Brad's NOS parts.
> http://www.bradsnosparts.com/ ; some years ago, I purchased some new
> reproduction shafts from him, as well as bushings., etc.
>
> John Hertog
> Sag Harbor NY
>
> _____
>
> From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
> Behalf Of Tomas Turovaara
> Sent: Wednesday, October 18, 2006 12:07 PM
> To: Chrysler300@xxxxxxxxxxxxxxx
> Subject: [Chrysler300] 61 300 g
>
>
>
> Name Tomas Turovaara
>
> Address Kengisgatan 33
> S-981 33 Kiruna
> SWEDEN
>
> Phone 46-980-14149 fax 46-980-66404
> E-mail tomas.turovaara@ <mailto:tomas.turovaara%40telia.com> telia.com
>
> Hi 300 club
> Is there any one known where I can find parts to the heat control valve on
> the exhaust manifold to a 300 G I need the counterweight ,thermostatic
> coil,
> valve, stop stud and valve shaft to left and right side.
> Regards from Tomas
>
>
>
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:Chrysler300-digest@xxxxxxxxxxxxxxx
mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap