[Chrysler300] Chrysler 300C/D grille restoration

["Owen Grigg" <ram300@xxxxxxxxxx>]

Hi all,

 

I'm having a major problem getting my "egg crate"  300C grille properly
restored, it was "done" once but came back looking worse than when I sent it
away. It has some very light pitting and the re-anodizing has not taken in
the corners where the horizontal and parallel bars meet, ie it was not taken
apart before anodizing.  I sent it back to be redone, but the
anodizer/restorer has no idea where to start or how to get it apart (or back
together)  without damage. I'm guessing it needs to be pulled apart, the
pits polished out and then each piece anodized and then re-assembled?
Getting it back together when it's already anodized may be impossible
without scratching it? Please any help, hints, or process on how to do this
properly would be really appreciated.

 

Thanks

Owen    



[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/