Re: [Chrysler300] master cylinder

["Matt Allyn" <mallyn@xxxxxxxxxxxxxxx>]

If the master is the ONLY new item in this new brake puzzle than there are two things to consider:

1.  Master is not fully releasing in the non-braking position. 
2.  There is an adjustable rod that comes of the power booster unit and the nut may need to be aqjusted IN to allow the piston on the master to fully release. 

Matt Allyn
Exec. in Charge of Prod.
Granada America
323-785-2129 office
323-785-2151 fax
562-533-2551 cell
  

-----Original Message-----
From: Bill Leahy <bleahy@xxxxxxxxxxx>
Date: Fri, 1 Sep 2006 10:29:36 
Cc:<Chrysler300@xxxxxxxxxxxxxxx>
Subject: Re: [Chrysler300] master cylinder

  i recently went to my brake guy because my master cylinder was leaking.

he replaced the master cylinder rather than rebuilding it...and i have 
good brakes and no leaky anymore.

but it now squeals loudly  when i first put on the brakes as i put the 
car in gear to take off / but not after i get going.

is that something to worry about?

62 300 sport driver (bill) in kennewick washington


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links



 



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/