[Chrysler300] Fan Clutch Solved

[mwl1967@xxxxxxx]

OK.. here's how I solved the issue of no clearance between the fan clutch and 
the radiator. After trying several aftermarket units of different 
manufacturers I finally called my local Dodge dealer. They delivered a MoPar Performance 
fan & clutch kit and asked me to try that. 

Well, the clutch fits the original fan blade and clears the 4 row radiator 
with at least an inch to spare.. you'd have even more room if you're only 
running a three row core.  The MoPar part number for the kit is 4120758 and cost 
about $95. Now... the clutch that comes in the kit has a part # of 4095704 but if 
you just try to buy that from your local dealer it will list at well over 
$200.  

Mike Laiserin
Phoenix, AZ  (114 out this weekend but still no rust)


[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
See what's inside the new Yahoo! Groups email.
http://us.click.yahoo.com/2pRQfA/bOaOAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/