Doug; I have a number of the fan clutches (including the short one or maybe not- haven't looked at them in years but do remember the two different lengths) when you come down, from Sacramento, to get the bumpers and H door panel - we will dig them out). I was not prepared to offer them yet until later this year or next, To the membership - The earlier email in which I offered bumpers and doors (free) has open up a flood of request for parts I had not plan to deal with so soon. The requests (plus those from Ebay - due to the few dash parts I had put on auction only because I had them out pulled all the dash parts and wiring harnesses, Etc. out to be set aside for reassembling my dash. So while at it I put a few extras on Ebay). I have spent nearly a whole week answering email, digging out request, taking pictures, packing and shipping - accomplishing little on my car and house (nor get the stuff done to support the fellow working on it) - so bare with me as I would like to help everyone in need but I am old and slow and not a parts dealer. I will eventually get back to your emails. For those that have a 62 sport 300 with red interior. A member in Europe asked (also some US members that I have yet been able to respond) for some red stuff (visor etc.) so, this afternoon, I pulled down all the red interior upho stuff to take pictures to send them (later tonight or tomorrow). Since I got down this stuff tomorrow got to get it back up the attic of garage) is anyone needing anything (center arm rest, kick panel, red leather bucket seat upper cushions , visors, arm rests, seat foam, ). Email me. Since I'm on the subject of seats - I have a complete set of good front and rear cushions, for hdt letter cars, (pleated tan color - had to move them out to get to the "red" stuff) for 60 or 61? - the fronts came off a swivel seat frame. These were in a 62 sport 300 I once had and bought the car just for the seats but never installed them in my H convert (different mounting attachments for the convert) - sold the center console last year . The foam is soft (I started to remove the covers to use on my H but stopped and ordered new foam instead of destroying good seats). I also have good bare seat frames (have to dig out to determine how many) and used letter - leather car seat covers. These, as well as everything will go on Ebay some day. but I will make some available to the club first. Regards; Ken Wilson, San Jose, Calif. P.S. Hoping to be able to drive my first letter car (the H I have been working on for 30 years) by my 70th next year - if I can still see! Doug Warrener wrote: >Mike, I have encountered the same problem with trying to find a thermo >fan clutch for an H. They are all too long. Hope someone has a source. >Doug Warrener > >________________________________ > >From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] >On Behalf Of mwl1967@xxxxxxx >Sent: Thursday, July 06, 2006 8:50 AM >To: Chrysler300@xxxxxxxxxxxxxxx >Subject: [Chrysler300] Speaking of Fan Clutches > > > >Hi All, >strange problem I seem to be having with aftermarket fan clutches >for my 70 300. The replacement fan clutches seem to have a longer shaft >( >easily an inch ) than the few surviving oem used examples I have left. >In fact >new Hayden etc aftermarket ones seem to have a longer shaft than "old" >aftermarket ones I have. >Needless to say I never had clearance problems when uprgading to >4 core radiators here in Phoenix until this time. I now have no >clearance for >the recored rad and didnt realize I had so little clearance available >with the >3core. After all, I had done this modification to several big block >fuselage >bodied Chryslers before with no problem. Yes, we checked to make sure >the >mounting brackets are where they are supposed to be and the tanks >areright up >against the radiator support. >Has anyone encountered this before? Should I try a "small-block" >part. Some suppliers have different part #'s for big and small block and >some >have the same. Same thing when looking up 383 vs. 440 cars. Any thoughts > >appreciated other than going back to three rows. Thanks ! > >Mike Laiserin >Phoenix, AZ ( cooled off to 97 yesterday ! ) > >[Non-text portions of this message have been removed] > > > > > > >[Non-text portions of this message have been removed] > > > >To send a message to this group, send an email to: >Chrysler300@xxxxxxxxxxxxxxx > >For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm > >For archives go to http://www.forwardlook.net/300-archive/ >Yahoo! Groups Links > > > > > > > > > ------------------------ Yahoo! Groups Sponsor --------------------~--> Great things are happening at Yahoo! Groups. See the new email design. http://us.click.yahoo.com/TISQkA/hOaOAA/yQLSAA/8LmulB/TM --------------------------------------------------------------------~-> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/