Re: [Chrysler300] A/C Fuse

["Warren Anderson" <wranderson@xxxxxxxxxxxxx>]

Is this the car that has the new AC/heater controls switch? The switches I
have  replaced have failed most times due to overloading. And, if a switch
is replaced and the reason for high current is not located and corrected the
new switch will fail again real soon.

The compressor clutch may be drawing too much current which falls way behind
blower motor drawing too much current in failure frequency. So, lacking, I
assume, proper current measuring test gear, fuses rigged up separately for
each item should locate the culprit.  HTH

Warren Anderson
Sedona,AZ



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/